Textile Non- Woven Machines-Calender:

• Machine frame is welded by profiled bar and armor plate, then eliminate internal stress by temper in order to be ametabolic forever.
• The roller is made of 45#. It must be made after anneal, simple-to manufacture. plated with chromium or teflon, careful lathe. Etc. The surface roughness is 0.8. There is good heat-transfer oil in the rollers. It’s heated by stainless steel pump. On one side of the roller, there is a single in-and-out revolving joint connected with oil compensator so that the oil in the rollers is kept out of broken off.
• First measure the temperature inside the rollers, then transfer to the control cabinet, enactment the temperature scope and the temperature auto-controlled within 2℃.
• Dance system of the roller: Distance between two rollers can be adjusted by manual.    
• Bearing: using Tuolindon band which is resisting high temperature and made in China. Bearing support is being high-precision techniques by cast iron. It is full of butter in order to be ametabolic under normal state.
• Joint: 1.5’, resisting high temperature, revolving.
• Driving method: electrical machinery + worm gear rducer + c

Specifications

Features

Apply for light weight nonwoven fabrics, such as sanitary material, interlining, shoe’s and bag’s lining, filter media,etc.